数控排钻讲解木工雕刻机安装的几点注意事项
1、注意周围环境的湿度。
1, pay attention to the ambient humidity.
2、打开电脑，安装需要的驱动程序和软件。
2, open the computer, driver and software installation needs.
3、拿出随机带的驱动，安装好设置内部参数，运行机器检查运行方向是否正确，行程是否准确。
3, take out random belt drive, installed internal parameter Settings, run the machine check the running direction is correct, is accurate.
4、机器放好后打开带的工具箱，接上各个电源线，检查一下电路是否能正常工作。
4, the machine put away after open the toolbox, connected to the power cord, check whether the circuit can work properly.